News & Resources

Home > News & Resources

Welcome to the IGC Technologies, LLC News & Resources page. Here you will find more information about our products, events, trade shows and more at IGC!

NEW! EnviroBlend-Heavy MetalTreatment Chemistry

IGC is proud to be partnering with PREMIER Chemicals,LLC, Manufacturer of EnviroBlend custom-blended treatment chemicals for rendering wastes Non-Hazardous! EnviroBlend is not a single chemistry, but rather a line of metal stabilization products developed to chemically stabilize metals such as lead, cadmium, zinc, chromium, industrial acid gas emissions and more.Competing chemistries often use lime or lime-based products as a means to control pH to treat the metals of containment. What is not commonly known is that lime-based products can drive the pH too high and cause leaching over time. EnviroBlend uses a buffering agent that does not elevate pH and consequently helps clients meet their regulatory goals for minimizing the leaching of metals into the environment. And EnviroBlend is well-known for effectiveness at low dosage rates, providing significant savings compared to expensive hazardous waste disposal fees. Call 800-877-8917 for a treatability study to determine the most cost-effective blend /dosage rate, or log on to www.enviroblend.com for more information

There are no active items in this category

There are 0 more items in the archives for this category

Trade Shows

Find us HERE!

CastExpo'10

March 20-23, 2010

Orange County Convention Center, Orlando, Florida

Booth 2010

Sponsored by the American Foundry Society Inc. and the North American Diecasting Association

For more information visit http://www.castexpo.com/

Wisconsin Chapter of AFS - 2010 Regional

June 17 - 18, 2010

Wisconsin Olympia Resort, Oconomowoc, WI

Booth 72

For more information click here: www.wisconsinafs.org

There are 0 more items in the archives for this category

Case Studies

Modern Castings Magazine, Product Innovations, January 2009

Veinseal HM for Steel
[Updated: 01/30/2009] [Filesize: 128K]

To validate the effectiveness of their latest development in anti-veining technology, IGC partnered with Northern Iowa University and Badger Alloys, Milwaukee, WI. The results of the research study were published in Modern Castings Magazine, January 2009.

There are 0 more items in the archives for this category

Answers to FAQs

IGC Technologies is totally committed to the development and distribution of product solutions to your toughest casting challenges. We listen to your questions to learn your production process. And we work with you until we find your best solution.

	How Much Liquid Rubber Do You Need???? [Updated: 02/04/2009] [Filesize: 80K] Use this handy guide to calculate the amount of rubber you will need for your project!
	Plaster 101-Mixing [Updated: 02/03/2009] [Filesize: 97K] Reproducible shop results can be obtained when uniform methods and procedures for mixing plaster are followed.
	Pumice Application Guide [Updated: 01/30/2009] [Filesize: 34K] Applications for pumice are ENDLESS! Use this quick guide to narrow the gap between "Which pumice should I use" to "This is PERFECT....Thanks IGC Technologies"!
	PREMIUM Investment [Updated: 01/30/2009] [Filesize: 1,227K] Phosphate-bonded, graphite-free speed cast investment with exceptional properties! Suitable for casting all types of dental alloys.
	GRANISIT Investment [Updated: 01/30/2009] [Filesize: 1,650K] Classic SILADENT CrCo investment for precision fit and smooth surface. Suitable for all precious, semi-precious and CrCo alloys.

There are 0 more items in the archives for this category

IGC News & Events

	Growth follows sale of Milwaukee foundry supplier [Updated: 03/07/2008] [Filesize: 37K] Read about IGC Technologies growth! Originally published in The Business Journal of Milwaukee, March 7, 2008.
	IGC Expands Product Line [Updated: 06/01/2007] [Filesize: 25K] New products added to IGC Dental Laboratory Product Line
	IGC Technologies Under New Ownership [Updated: 11/21/2006] [Filesize: 35K] Read about this exciting news!

There are 0 more items in the archives for this category

Partners

IGC Technologies, LLC is an approved Distributor for the following Manufacturers:

	EnviroBlend! EnviroBlend is innovative metals treatment technology for heavy metal stabilization. It does not "cover up" or "encapsulate" the problem. Rather, EnviroBlend chemically stabilizes the metal in question, reducing hazardous environmental leaching. Industrial applications include Foundry Operations, Slag Treatment/Slag Disposal Sites, Battery Manufacturing and Recycling Facilities, Primary and Secondary Smelting Operations and more. EnviroBlend chemistries are approved by the EPA/DEP on hundreds of projects across the United States and Internationally!
	Polytek Development Corp. Polytek Development Corp. manufacturers the most complete and versatile lines of liquid mold rubber, casting resin and other specialty molding and casting compounds.
	Siladent Siladent Model Systems, Investments, Duplication and Special Products
	G-P Gypsum

There are 0 more items in the archives for this category

General Terms & Conditions

General Terms & Conditions
General Terms & Conditions All IGC Technologies ("IGC") products are rendered exclusively on the basis of the following terms and conditions, which will apply to both this and all future business transactions with any customer with whom IGC... More Info

There are 0 more items in the archives for this category

IGC Technologies, LLC Credit Application

Print and complete the IGC Technologies, LLC Credit Application form. FAX to 414-540-2350 for review and approval.

IGC Credit Application
[Updated: 02/09/2009] [Filesize: 71K]

Print, complete and fax to 414-540-2350

There are 0 more items in the archives for this category