Investments - Crown & Bridge

Introducing - SILADENT Dr. Böhme & Schöps GmbH phosphate-bonded investments, specifically developed for casting all types of dental alloys!

Premium - universal investment

Phosphate bonded, graphite free precision investment with a variety of uses and exceptional properties. For fast or conventional burnout. Suitable for crown and bridge cases, partial denture and combi techniques as well as Empress® and other press ceramic systems, CrCo fixed/removable appliances and castable ceramics.

• Universal application
• Expansion precisely regulated by varying the liquid concentrate (Type 100 liquid)
• Very smooth casting surfaces with excellent reproducible fit
• Well-proven for castable ceramics (e.g. Empress®, Ivoclar)
• Suitable for all dental alloys (except titanium)
• Easy storage and better value because of its universal uses range of application.

150 X 60 gram pkg
20 kg carton (8 X 2.5 kg pkg)

Type 100 - expansion liquid

Developed especially for use with Siladent phosphate-bonded investments. Siladent technique instructions should be closely followed in utilizing this liquid

3 liter canister

BEST VALUE! Crown & Bridge Technique Starter Set Includes:

• Premium investment,
• Type 100 expansion liquid,
• Size 0 Silicone Sleeve Model Shaped, Size 1 Silicone Sleeve Model Shaped,
• Size 0 Model Shaped base plate, Size 1 Model Shaped base plate,
• Size 6 Silicone Sleeve C & B, round
• Round Mold base plate with sprue former

Click Here for Crown & Bridge Accessories

Investments - CrCo

Introducing - SILADENT Dr. Böhme & Schöps GmbH

For over ten years, Granisit® has bee relied upon as the classic Siladent CrCo investment for precision fit and smooth surface. Phosphate-bonded, graphite-free, precision investment

• Suitable for all precious, semi-precious and CrCo alloys
• The amount of expansion may be precisely regulated by varying the concentration of the expansion liquid
• Expansion is regulated using Type 100 liquid.
• High marginal stability and reproduction of detail graphic accuracy
• Very smooth casting surfaces and excellent reproduction of details

20 kg = 50 X 400 gram pkg

Type 100 - expansion liquid

Developed especially for use with Siladent phosphate-bonded investments. Siladent technique instructions should be closely followed in utilizing this liquid

3 liter canister

Click Here for CrCo Accessories

Investments - C & B -Accessories

Introducing - SILADENT Dr. Böhme & Schöps GmbH

All SILADENT investments may be used without metal rings. SILADENT silicone sleeves with plastic ring base plates are an economical alternative to metal rings and rubber bases. Using this method, the wax pattern is affixed to the plastic base plate with a sprue in the usual way. The silicone sleeve is placed over this and the wax pattern invested using the normal procedure. The base plate and silicone sleeve are removed prior to placing the ring in either a hot or cold furnace. With proper care, these accessories may be reused indefinitely.

Base plates with silicone sleeves, round
For economic, direct investing with the model base plate for crown and bridge work.

• Vertical groove structure on the inside of the ring increases the surface area
• Setting expansion is not affected, ensuring an optimum fit of the casting
• Use of a silicone sleeve ensures a more uniform heat uptake and controlled cooling of the mold.

Silicone Sleeve C & B, round, size 3, each
Silicone Sleeve, C & B, round, size 6, each

Round casting mold base with sprue former, white
Sprue formers are supplied with these silicone sleeves in sizes 3 & 6

Round Mold base with sprue former, size 3, each
Round Mold base with sprue former, size 6, each
Sprue former, pack of 10

Investments - CrCo - Accessories

Disposable Ring Tape

Adhesive disposable ring tape for use when investing CrCo. Advantages compared to conventional casting rings:

• The surface area of the investment molds outer surface is increased considerably due to the corrugated effect of the ring material
• This increases the amount of heat absorbed during burnout.
• Diameter of the mold is no greater than that of the duplicate model
• Saves investment and space within the furnace

25 mm disposable ring tape, each

Silicone Sleeve, model form

For economic direct investing with the model-shaped base plate

• Vertical groove structure on the inside of the ring increases the surface area
• Setting expansion is not affected, ensuring an optimum fit of the casting
• Use of silicone sleeve ensures more uniform heat uptake and controlled cooling of the mold
• Whole span of the pattern can be placed a the same distance from the mold wall, optimizing the fit of the casting

Size 0, 70 X 55 mm, each
Size 1, 75 X 60 mm, each

Model-shaped Base Plate with sprue former

For CrCo and ringless direct-wax investing with the model-shaped silicone sleeve

Size 0, 70 X 55 mm each
Size 1, 75 X 60 mm, each